Rubber EPDM Liner Double-Sided Seam Tape - 3"
|
|
Click to Enlarge
- Details
Double Sided 3" EPDM Seam Tape features an easy to use "Peel & Stick" method of splicing together EPMD pond liners. Simply follow through the included instructions, and once done, cover with 5" EPDM Liner Seam-Cover Tape.
Position sheets of liner and align edges to required overlap. Mark bottom sheet to indicate top sheet location, then folding back top sheet.
Clean and/or prime the seam area of both rubber sheets using FastSeam EPDM Liner Primer. CAUTION: wear protective gloves and read all labels and instructions when using FastSeam EPDM Liner Primer.
Make guide marks for the splice tape much as in Step 1, except that the new marks will be 1/2" out from the edges of the bottom sheet.
Fold back top sheet. Begin unrolling splice tape by aligning the edge of the paper with the marks in step 3. Continue along the full length of the seam.
With the paper backing still attached to the tape, use a roller to ensure good contact. Place the top sheet of rubber back over the applied tape.
Remove the paper backing by pulling out from under the top sheet at a 45º angle. Allow top sheet to fall freely onto exposed splice tape. Roll entire seam with roller.
How to use:
When to use:
Double Sided 3" EPDM Seam Tape is used when seaming two pieces of EPDM liner together, applying an EPDM repair patch to a damaged liner, or to seal liner to skimmers or waterfall boxes.
Precautions:
Double Sided 3" EPDM Seam Tape is extremely sticky, and will easily attach to itself or anything else it makes accidental contact with.
