- Easy To Install
- Ideal For Use in Skimmers
- Maintain Constant Water Level
Atlantic™ Auto Fill Valve Kit is designed to maintain a consistent water level in your skimmer box. This kit will prevent utilities, such as pumps, from drying up due to lack of water or even prevent your pond from overflowing with too much water. Installation is easy and all the necessary hardware is included to connect the valve to a standard garden hose, 1/2" irrigation line or 1/2" PVC.
Auto Fill Valve Kit
||1/2" Irrigation Line, 1/2" PVC, Standard Garden Hose
When To Use
Atlantic™ Auto Fill Valve Kit should be used from early spring to late fall. Stop usage before freezing temperatures occur.
How To Install
Step 1: Determine location of Auto-Fill Valve, after installing your pump, check valve assembly and discharge hose in the skimmer. Make sure the Auto-Fill Valve will have clearance on all sides.
Step 2: Drill an 7/8" hole in the skimmer box using a hole saw. Most skimmers will have drill-points on the box.
Step 3: Insert the Auto-Fill making sure the gasket is inside the skimmer and the plastic retaining nut is outside. Tighten the retaining nut until snug, but don't over tighten.
Step 4: Connect the Auto-Fill to the garden hose using the included fittings of your choice after wrapping the 1/2" male threads on the Auto-Fill with thread sealant.
Once water is supplied to the Auto-Fill it will maintain the set water level by automatically adding water when the level drops.Water level can be adjusted by loosening the wing nut and raising or lowering the height of the Auto-Fill float. Establish proper water level using the water line mark on the weir door frame.
Here are the replacement parts for Atlantic ™ Skimmer Auto Fill Valve.
The first step towards effectively treating any pond weed is proper identification. Atlantic™ Skimmer Auto Fill Valve is recommended for use against each of the weeds listed below. Click on your desired weed for more information and alternate control options.