Atlantic™ Skimmer Auto Fill Valve
Click to Enlarge



This item ships via motor freight and may arrive separate from the rest of your order
This item ships from the manufacturer and may arrive separate from the rest of your order
Live Koi ship from our hatchery and may arrive separate from the rest of your order
Plants ship in accordance with your climate zone & are excluded from our free shipping promotion
Not sure which climate zone you're in? Find out here!
This item ships via ground carrier

  • Details
  • Tech Specs
  • Easy To Install
  • Ideal For Use in Skimmers
  • Maintain Constant Water Level

Atlantic™ Auto Fill Valve Kit is designed to maintain a consistent water level in your skimmer box. This kit will prevent utilities such as pumps from drying up due to lack of water or even prevent your pond from overflowing with too much water. Installation is easy and all the necessary hardware is included to connect the valve to a standard garden hose, 1/2" irrigation line or 1/2" PVC.

Tech Specs

From product dimensions to operation manuals, the TECH SPECS tab contains all of the information you need to choose the right equipment for your pond.

Atlantic Universal Auto Fill Valve Kit
Auto Fill Valve Kit
Fittings 1/2" Irrigation Line, 1/2" PVC, Standard Garden Hose
Max PSI 60

When To Use

Atlantic™ Auto Fill Valve Kit should be used from early spring to late fall. Stop usage before freezing temperatures occur.

How To Install

Step 1: Determine location of Auto-Fill Valve, after installing your pump, check valve assembly and discharge hose in the skimmer. Make sure the Auto-Fill Valve will have clearance on all sides.

Step 2: Drill an 7/8" hole in the skimmer box using a hole saw. Most skimmers will have drill-points on the box.

Step 3: Insert the Auto-Fill making sure the gasket is inside the skimmer and the plastic retaining nut is outside. Tighten the retaining nut until snug, but don't over tighten.

Step 4: Connect the Auto-Fill to the garden hose using the included fittings of your choice after wrapping the 1/2" male threads on the Auto-Fill with thread sealant.

Once water is supplied to the Auto-Fill it will maintain the set water level by automatically adding water when the level drops.Water level can be adjusted by loosening the wing nut and raising or lowering the height of the Auto-Fill float. Establish proper water level using the water line mark on the weir door frame.