The Pond Guy<sup>®</sup> AllClear™ & SolidFlo™ G1 Combo Kits

The Pond Guy® AllClear™ & SolidFlo™ G1 Combo Kits

Biological Filter & UV in One

  • Three Types of Filtration, One Powerful Unit
  • External Indicators To Monitor Filter
  • Perfect For Existing Or New Ponds

Keep your pond water healthy and crystal clear with The Pond Guy® AllClear G1 Pressure Filter with UV. The AllClear G1 combines the power of mechanical, biological and ultraviolet filtration into an efficient yet economical pressurized filtration unit. All sizes of the AllClearG1 Pressure Filter can be camouflaged with a TrueRock Medium Boulder Cover.

Save 15% by purchasing an AllClear G1 Pressure Filter with the recommended SolidFlo G1 Pump, and we will guarantee clear water! The SolidFlo G1 Pump is a continuos-duty energy-efficient asynchronous pump in a low profile design. The sturdy pre-filter pump enclosure keeps out large debris while allowing ¼ particles to pass. The SolidFlo G1 Pump is designed to sit flat on the pond's bottom.

Looking for a self cleaning AllClear Pressurized Filter? Try the AllClear G2 Pressurized Filter & SolidFlo G2 Combo that includes a convenient back flush feature for trouble-free maintenance!

Tech Specs

The Pond Guy AllClear G1 2400 & SolidFlo G1 1200 Combo
AllClear G1-2400/SolidFlo G1-1200
The Pond Guy AllClear G1 2400 & SolidFlo G1 1600 Combo
AllClear G1-2400/SolidFlo G1-1600
AllClear G1 Filter Size AllClear™ 2400 AllClear™ 2400
SolidFlo G1 Pump Size SolidFlo™ 1200 GPH SolidFlo™ 1600 GPH
Max Pond Size Up To 2,400 Gallons Up To 2,400 Gallons
Barbed Fittings 1", 1-1/4", 1-1/2" 1", 1-1/4", 1-1/2"
Backflush Feature No No

*We recommend changing your UV bulb once per season for best results.
**We do not recommend using flex PVC tubing with these filters.
**UV bulbs are not covered under manufacturers warranty.

AllClear G1 Pressurized Filter FAQ

Can I connect the filter to my waterfall?

Yes, as long as the gallons per hour on the pump used does not exceed the max flow rate of the filter in the chart above. If your waterfall pump exceeds the max flow rate of the pressurized filter, consider running the filter on a smaller pump.

What happens if I run a pump that is above the recommended max flow of the AllClear G1 Pressurized Filter?

If your pump's flow rate (gallons per hour) is higher than the max flow rate of the AllClear G1 Pressurized Filter, the UV will underperform as there will not have enough exposure time to clear the water. You also run the risk of damaging the filter unit and seals by creating too much pressure, which in time can cause the filter to leak.

How often do can I need to clean my AllClear G1 Pressurized Filter?

The amount of fish in your pond will determine how frequently you will need to clean your filter. In general, clean your filter every other week or when the pressure indicator displays red or when water flow is reduced.

How do I clean my AllClear G1 Pressurized Filter?

Simply unlatch the filter lid and gently remove. Rinse the filter pads and bio media with pond water. Do NOT use chlorinated tap water. Place the filter pads back into the filter so the blue pad is on the bottom and the black pad is on top. (If you have the 2400 model the yellow pad will be in the middle).

Why do I have to bury my AllClear G1 Pressurized Filter in the ground?

Burying the AllClear G1 Pressurized Filter up to the lid allows for easy camouflage of the filter as well as the kink free tubing. It also secures the unit so it doesn't tip over or fall into the pond. With the lid exposed above ground, this also allows for easy routine maintenance. You can even further camouflage your AllClear G1 Pressurized Filter by using a TrueRock Cover.

Can I run the AllClear G1 Pressurized Filter in the winter?

If the ground/pond freezes during winter in your area, it is important to drain and remove the entire AllClear G1 Pressurized Filter before winter. This protects the unit from the freezing cold temperatures, which can lead to the unit being damaged.


Usage Information

Replacement Parts

Here are the replacement parts for The Pond Guy ® AllClear™ & SolidFlo™ G1 Combo Kits.

Weeds Treated

The first step towards effectively treating any pond weed is proper identification. The Pond Guy® AllClear™ & SolidFlo™ G1 Combo Kits is recommended for use against each of the weeds listed below. Click on your desired weed for more information and alternate control options.